NEWS
-
Multilane launched 3 types of Diagnostic AdaptersMultilane just launched 3 Diagnostic Adapters
Multilane just launched high speed diagnostic adapters that supports SFP28, QSFP28 & QSFP-DD for factores. With this adaptors designeds can easier to make the port debugging. Also provide the SFF Analyzer which can connects to PC for easy operation. Products are avaliable now. Welcome to contact us for mroe information.
-
Qulsar upgrades Qg 2 capabilities
Qg 2 is now capable of handling 450 unicast slaves at full packet rate.
SAN JOSE, CALIF. (PRWEB) MAY 22, 2018 - Qulsar, a provider of multiple end-to-end precise time synchronization solutions, announced a significant upgrade for Qg 2 (its Multi-Sync Gateway and PTP Grandmaster for indoor small cells). The Qg 2 is now capable of handling 450 unicast slaves at full packet rate, redefining industry performance in its class of "edge" grand master.
Adding new capabilities to Qg 2 was important in order to offer a highly scalable system for next-generation networks that evolve and expand.
"The Qg 2 is available in highly scalable configurations, easy to upgrade in the field and can cater to a customer's growing network", said Kishan Shenoi, Ph.D., Qulsar's CTO. "We continue to evolve and enhance what is an industry-leading solution with capabilities that enable our customers to evolve their networks."
Qg 2 is an IEEE 1588-2008 (PTP) Grand Master and Boundary Clock with low total cost of ownership. It leverages Qulsar's unique industry-leading PTP algorithms to deliver stringent timing for next generation wireless (LTE-A, LTE-TDD and 5G architectures) and supports ITU-T G.8265 and G.8275 frequency and phase profiles.
The Qg 2 is designed for the network edge and offers capabilities for ease of management, deployment and resilient performance in the face of loss of reference.
"We have accomplished many successful mobile operator network trials worldwide and are very encouraged by industry's initiatives to deliver tighter precision of synchronization not only for LTE features but also for upcoming 5G services, which demand tens of nanoseconds of precision", said Minoo Mehta, VP of Business Development and Sales.
About Qulsar
Qulsar enables performance through precisely synchronized time and is a provider of full end-to-end solutions for multiple mission critical applications. Qulsar's precise timing solutions play a key role in solving the bandwidth bottleneck in advanced mobile networks and in enabling real-time applications in the industrial Internet of Things. More information is available at http://www.qulsar.com.
-
RAD’s vAccess Shortlisted for Most Innovative NFV Product Strategy Award
RAD’s vAccess Shortlisted for Most Innovative NFV Product Strategy Award
Service Delivery and Assurance VNF Boosts White Box PerformanceRAD, the industry pioneer of network edge virtualization, today announced that its recently released vAccess VNF for network edge virtualization was selected as finalist for Light Reading’s Leading Lights award in the category of Most Innovative NFV Product. The prize is awarded to the technology vendor that has devised the most innovative network functions virtualization (NFV) product strategy during the past year.
vAccess, which was commercially released in April, is RAD’s latest addition to its comprehensive vCPE Toolbox, which allows Service Providers to roll out vCPE services today without vendor lock-in. Part of RAD’s Service Assured Access solutions, it allows immediate deployment of value added SDN/NFV-based services over any access. vAccess upgrades any white box operating system to carrier-grade level by adding VNF assurance capabilities and, when combined with RAD’s pluggable physical network functions (P-PNF), adds missing network capabilities such as CE2.0 demarcation (with RAD’s MiNID) and interfaces such as xDSL, PON and legacy TDM.
“We are thrilled to have been shortlisted for the Leading Lights awards,” says Ilan Tevet, VP Marketing and Business Development at RAD. “This recognizes our commitment to deliver on the original promise of NFV and SDN – to allow service providers true freedom in selecting the best solutions that fit their needs and avoid vendor lock-in”.
A live demo of the multifunctional vAccess was successfully presented at the MPLS-SDN-NFV World in Paris in April and will be also shown at the upcoming Big Communications Event in Austin, Texas later this month. vAccess is already in use by a Tier 1 operator in North America. There it helps to extend the operator’s uCPE-based service beyond fiber access over traditional TDM circuits, which still make up 20 to 30 percent of deployments, especially in rural sites.
The winners will be announced at the Leading Lights awards dinner, which will be held on Monday, May 14, in Austin, Texas, the evening before the doors open to the Big Communications Event. -
Eoptolink unveils ER4 Lite & 4WDM-40 QSFP28 transceivers for up to 40km transmission distance
Eoptolink Technology Inc., Ltd (SZSE: 300502) has further strengthened its 100Gbps QSFP28 family with the unveiling of its new 100Gbps QSFP28 transceiver modelsfor applications up to 40km. The ER4 Lite supports 100GE without FEC and OTU4 with FEC. The 4WDM-40 supports 100GE with KR4 FEC. The family consists of:
• EOLQ-161HG-40-L7 : 100G QSFP4WDM-40 40km transceiver, 0 to 70°C
• EOLQ-161HG-30-LA : 100G QSFP ER4Lite 30km transceiver, 0 to 70°C
“We are proud to add 30km & 40km capability to our QSFP28 family”, said James Zhang, Eoptolinks Director of Business Development. He adds, “The QSFP28 ER4 Lite supports 100GE and OTU4 applications, while the QSFP28 4WDM-40 variant supports 100GE with KR4 FEC. The addition of these transceivers will provide our customers with much needed choice for longer distance connectivity of their 100G traffic.”For mroe information, please contact us.
-
MITS intorduces MPT-16 cable for 200G/400G QSFP-DD & 400G OSFPMITS intorduces MPT-16 MPT cable for 200G/400G QSFP-DD & 400G OSFP
MITS just introduced the MPT-16 cable to meet the high Speed Data Center requirement. There are two seriels cables for use. 1. MPT16 Trunk Cable & 2. MPT16 Loopback Cable. For more info, you can refer the below link for drawing. If you need the sample and price quote, please contact us for more info.
1. MPO-16-OM3-FM/FM-1-xx (MPT-16 Trunk Cable)
2. MPO-16-OM3-LB-010 (MPT-16 Loopback Cable) -
Eoptolink provides a whole series SMPTE SFP transceivers
Eoptolink provides a whole series SMPTE Video SFP transceiver for 3G-SDI, 6G-SDI and 12G-SDI
EOPTOLINK (SZ: 300502) has released Digital Video SMPTE 3G, 6G and 12G transceiver/Transmitter/Receiver series. Fiber Optic Transport of HD/SD-SDI It is becoming increasingly necessary and economically feasible to transport UHD/HD-SDI signals over fiber instead of coaxial cable. The reasons are many including increased bandwidth, lower cabling cost, noise immunity and greater transmission distances.
Prior to 2006, several standards were used to define how SDI signals were to be transported over fiber. Now, there is one standard to define the many aspects and parameters of the fiber optic interface for the transmission and reception of SDI over fiber. SMPTE 297-2006: This standard defines the fiber optic interface for the transmission and reception of SDI signals at various data rates:
For more info, please visit our website. -
RAD lunches Smart-Node products -- All-in-One Power and Communication SolutionRAD's Smart-Node is an outdoor power and communication solution that reduces costs and accelerates the roll-out of smart-city, IoT and telecom projects.
The all-in-one Smart-Node solution offers a wide variety of power and networking interfaces including fiber and an array of radio technologies to connect multiple devices such as CCTV cameras, Wi-Fi access points and IoT sensors.
If you have any needs, please feel free to contact us. -
Ethernity Displays Carrier Ethernet Aggregation Switch Router on COTS Servers with Multiple FPGA SmartNICs Architecture at MWC2018
Meets demand for traffic aggregation and integration of Carrier Ethernet on NFV platform at the network edge
Stand 2K63, Hall 2, MWC2018, Barcelona, Spain – Ethernity Networks (AIM: ENET.L), a leading supplier of data processing technology on programmable logic for high-end carrier grade data processing offload, today demonstrated a scalable Carrier Ethernet aggregation Switch Router platform on a COTS server that utilizes OVS DPDK as a fabric between multiple ENET FPGA SmartNICs hosting multiple 10GE ports.
This unique implementation of the ENET Flow Processor offers cost-efficient Carrier Ethernet functionality in virtualised networks while maintaining the COTS nature of NFV environments. This overcomes the significant challenge that communications service providers (CSPs) face in achieving carrier-grade performance upon virtualisation of their network infrastructures. Ethernity’s solution provides SLA support, OAM, routing, multi-protocol interworking, and security that cannot be deployed efficiently with software-only implementations, while eliminating vendor lock-in.
Once Carrier Ethernet is integrated into the server with the ENET FPGA SmartNIC, the ENET Flow Processor can be used for VNF offloading, including vFW, vRouter, vBRAS, and vEPC, providing further gains in CPU efficiency and lower latency.
“Virtualisation of a network loses its value if the price of virtualisation is the loss of carrier-grade services,” said David Levi, CEO of Ethernity Networks. “At Ethernity, we resolve performance, security, and power consumption issues to provide the best of both telecom worlds – virtualised and traditional – with guaranteed quality of experience.”
-
Shenzhen TiCOMM Selects Ethernity Network’s FPGA-Based SD-WAN Platform
Ethernity’s FPGA SoC solution provides powerful, accelerated, cost effective SD-WAN and vCPE platform, ensuring high performance at reduced expense
Lod, Israel – Ethernity Networks (AIM: ENET.L), a leading supplier of data processing technology on programmable logic for high-end Carrier Ethernet applications and data processing offload, announced today that its low cost FPGA-based telco edge cloud platform has been selected by Shenzhen TiCOMM, a Chinese SD-WAN solution provider.
The innovative platform will be used as a combined Network Interface Device (NID) and SD-WAN gateway solution. The system-on-chip (SoC), featuring both an array of powerful ARM CPUs and an FPGA in a single, low-cost programmable platform, will be equipped with 10G interfaces, Carrier Ethernet functions, IPSec, and ARM processors for SD-WAN software. The platform can be packaged as a standalone device or can be installed as a SmartNIC on any standard server. The solution supports 10G IPSec and 20G Carrier Ethernet switching and routing throughput.
The solution will be jointly showcased by Ethernity and TiCOMM at the Mobile World Congress in Barcelona between the 26th of February and the 1st of March 2018 at Hall 2 stand 2K63.
“Ethernity’s NIC-in-NID, powered by Ethernity’s ENET flow processing technology, is a natural match with TiCOMM’s SD-WAN solution architecture,” said Mr. Liu Yu, CEO of Shenzhen TiCOMM. “The performance and features fit the requirements of SD-WAN very well. Ethernity’s NIC-in-NID reduces the time-to-market of TiCOMM’s solution and improves our cost efficiency as well. It’s a very powerful solution enabler for TiCOMM.”
TiCOMM’s SD-WAN solution reduces WAN expenditures, improves the quality of interconnections, and extends coverage scope with a secure, simple, fast service. It provides a real-time view of the network, dynamic optimal path selection, and an intuitive OAM management interface. By using Ethernity’s FPGA- and ARM-based platform, TiCOMM will benefit from a low-cost, high-capacity, yet fully programmable solution compared to x86 servers, resulting in higher throughput and lower expenses. Nonetheless, the platform is still able to connect to external servers to access even greater computing resources through the embedded NIC function.