|
The Ag9900 series Ultra-miniature POE modules are the smallest in the world. With a footprint reduced by an incredible 40% compared to the tiny Ag9800 they provide full POE PD module functionality in the smallest of footprints while maintaining Silvertels cost competitive edge. The addition of just two diode bridges and one electrolytic capacitor to this miniscule module is all that is needed to implement POE functionality on any product. Ag9900 is fully compliant to the IEEE 802.3af PoE standard, providing POE signature, classification, isolation and DC/DC conversion to 12V, 5V or 3.3V, while taking up minimal PCB space. The module is ideal for any space limited PoE applications such as IP cameras, biometric readers, RFID, wireless access points, HDBaseT extenders, VOIP phones, networked audio etc. Industrial temperature operation is also an option further extending the range of uses. A 24V version will be released in Q2 2017.
|
The Ag9800 series POE modules are miniature low profile PD modules. Designed so the addition of just 2 diode bridges and an electrolytic capacitor to this tiny module will add PoE functionality to your product. Ag9800 is fully compliant to the IEEE 802.3af PoE standard, providing POE signature, classification, isolation and DC/DC conversion to 12V, 5V or 3.3V while taking up minimal PCB space. The module is ideal for space constrained PoE applications such as IP cameras, biometric readers, RFID, wireless access points, HDBaseT extenders, VOIP phones, networked audio etc.
|
|
Ag9700 is a complete cost reduced, competitive and reliable POE module for high volume applications. The modules extract power from Cat5 Ethernet cables and conform to the IEEE 802.3af standard. Ag9700 requires minimal external components and provides isolation between input and output. Available in SIL and SMT* packages, with 24, 12, 5 or 3 Volt outputs to suit a range of applications. An Industrial temperature SIL option, for operation between -40C to +85C is also available.
* NOTE: Ag9700M Series Not Recommended for New Designs
Use Ag9800M for New SMT Designs
|
Ag9512 is a self-contained module for providing power to IP security cameras. Its' format and footprint is standard for IP cameras (including box and dome). Ag9512 extracts power from a twisted pair Category 5 Ethernet cable, conforming to the IEEE 802.3af PoE standard.
|
|
Ag9312 and Ag9330 modules are ideal for applications such as IP cameras where an AC and DC supply is used as backup or as an installation option. The modules extract power from Cat5 Ethernet cables and conform to the IEEE 802.3af (Ag9312) or at/POE+ (Ag9330) standards. In addition to POE, Ag9300 modules also provide auxiliary inputs for DC voltages from 12V to 48V or a comparable AC voltage (after external rectification).
|
Not recommended for new designs.
Ag9700 is the low cost replacement
Ag9400 series extract POE power from twisted pair Cat5 Ethernet cables and conform to the IEEE 802.3af PoE standard. Ag9400 is used in high volume IP Cameras and VoIP phone applications. Ease of use, minimal external components, and an isolation barrier between input and output are key features.
|
