Long Reach Ethernet:
This modem is the Ethernet Over Phone line (RJ-11,Long Reach Ethernet) bridge that efficiently extends 10/100 Ethernet circuits to Phone line (RJ-11) for Internet and Intranet access. Over 1000 meters(3,280feet) at 45Mbps using existing phone wire. This modem will allow Ethernet connectivity in existing facilities without pulling extra cable. This is perfect solution to Ethernet on the factory floor where systems have been upgraded from slower serial communication to Ethernet networking. Installation is easy with a single switch setting. One end is set for local and the other remote. This modem is used in phone wire to extend Ethernet connectivity over existing phone grade phone wire.

- High-Speed 100/95Mbps communications link over existing phone line cable, Asymmetrical on EoRJ-11
- 45Mbps@ 1000 meters(3,280feet), reach down to 4Mbps @ about 2.4Km(8,000feet)
- Operates transparent to high layer protocols such as TCP/IP
- Auto-MDIX and Auto-sensing 10Base-T or 100Base-TX and Full or Half-Duplex on the Ethernet port
- Plug and Play design for simple installation, single DIP switch for configuration.
- Status LEDs for simple monitoring of the device and connection status
- Any IP device that can do the long distance Poin-to-Point link thru RJ-11
- IP CAM in Elevator with better quality and easy to installation
- Analog CAM for distance extension
- Power over RJ-11 for remote terminal
|
Standard :
Interface :
Connections :
|
Rich LED indicators :
Dimensions : 155 x 83 x 30mm Operating Temperature :
Operating Humidity :
Power Supply : External Power Adapter 5V@1A |
1. HDTV
2. In the Elevator (High anti-Noise solution than Industry)










News-Product

