The PoE (Power Over Ethernet) Switch supports four Fast Ethernet ports plus one 100Base-FX up-link port. The switch provides Power over Ethernet functions to deliver 35Watts of power budget per port which is IEEE802.3af/at complaint.

      If you have anything need or question, please feel free to contact us.

• Standards: IEEE802.3/IEEE802.3u Standards 
• Ports 1-4 : With POE Injector feature, support auto-crossover & auto-polarity & Port 5 : With fiber connector as uplink
• Transmission speed: 100Mbps (100base-Tx), 10Mbps(10base-T) Auto-negotiating
• Switch Technology: store-and-forward
• Protocols: CSMA/CD
• Flow Control : IEEE802.3x (full-Duplex), Backpressure (Half-Duplex)
• Data Transmission Rate: 148800pps for 100base-T/ 148880pps for 10 base-T
• Address Table : 1K MAC address, self-learning
• PoE port:  Port 1-4: auto power management; Pin assignment: TX(1,2), RX(3,6), V+(4,5), V-(7,8)
  • Maximum PoE Power: Per port 35W
  • PoE detection : IEEE802.3af/at
  • POE protection : Over Temp., Over Current & Over/Under Voltage
  • Power Input : DC 48V (42 V~ 60V) dual DC inputs with reverse polarity protection (5 pins Terminal block)
• Power Consumption : 5W without PD loading
• Operation Temp. : -10℃~ 70℃
• Dimension : 40 x 118 x 159 mm (HxWxD)
• Fiber Optic Port:
  • Fiber optic port: ST/SC/SFP (duplex LC connector)
  • Port speed 100Base-FX(100Mbps),full duplex
  • Wave length : 1310nm