ENET 3000 Reference Design

ENET 3000 Reference Design:

ENET3xxx Reference Design)

Ethernity Networks ENET3xxxRD is the Reference design kit for the ENET3xxx device options . It comes with on board 4 x GbE ports and two PTMC connectors to accommodate all the interface options of the ENET3xxx.

As the ENET architecture supports non blocking switching between all port/interfaces, the optional interface for the PTMC connector can be used for Network or user side use.

The ENET3xxxRD demonstrate the configurable interface options offered by ENET3xxx and can be used by Telecom Equipment Manufactures (TEM) as an Edge modular multi service platform that can accommodate many user interfaces options.

System Block

System Application

MDU/FTTC/FTTB platform

The ENET3xxx can be used to serve 4 GbE up link ports to support full ring application or 2GbE interface together with optional connectivity to off the shelf PON MAC, together with optional user face interfaces including 32 Fast Ethernet, 48 high speed VDSL.

Carrier Ethernet

The ENET3xxx can be used to Support 8 GbE user face ports ( 4 GbE on board + 4 GbE on one of the PTMC board) together with SPI-3 up link port, that serve for connectivity to EoS mappert and then can be connector to OC-48 SONET mapper.

Further more instead of 4GbE interface located on one of the PTMC module , one can connect 16 E1/T1 CES module, or another OC-12 SONET model with CES functionality , such that the module will be connected to main board through GMII/RGMII.

And finally the board can be used for a pure Carrier Ethernet Switch and Traffic Manager, equipped with 12 GbE port (4 on board and additional 8 through the connectors)