【Publish Date:2009-03-27】

MITS just introduces a whole series of Power Over Ethernet (PoE) kits solution. With the PoE Kit, It is simple to install, requiring no tools and no software. When install, you just need to plug the Injector unit into a power outlet and your Switch, and then connect the Splitter Unit to you the network device with standard Ethernet & DC cable.  There is No infrastructure change at all. It does save lots of cost for new cabling and electricity set up.

This Kits solution are including :

• Injectors / Mid-Span / End-span :
  • IEEE802.3af compliant, proprietary PoE
  • Pre-IEEE802.at (high power delivery) -- from 30W to 50W output
  • High Power Gigabit Ethernet PoE
  • DC input PoE for industrial Rail application
  • Mid-span -- multi-ports PoE that supports 8, 16 & 24 ports. Also supports high power PoE.
  • End-Span -- DC input, with 4 PoE ports plus 1 port Ethernet or 10/100 Fiber transceiver port as uplink.

• Splitter :
  • IEEE802.3af compliant & proprietary PoE
  • high power  PoE from 25W to 40W outputs and also support the Gigabit application
  • High power 24Vac output upto 40W

With offering different types PoE gives different application flexibility. No matter wide range AC input or DC input, we can supports for both of them. We also can do different O/P powers and voltages to fit the different network devices' power requirement.

The main target applications are : IP Phone, IP Surveillance Camera, WiFi AP, WiMAX BS, Door Security, POS, Netbook PC, ...etc..